邻居少妇张开腿让我爽了在线观看,国产精品天天AV精麻,木下凛子成人中文在线,综合激情天天

     
  中文版 English
 
Hot news:
  Products
IEC Test Finger Probe
IPX1-IPX9K Waterproof Test Equipment
Electrical Appliance Testing Equipment
Environmental Test Chamber
Battery test equipment
Textile Test Equipment
Mechanical testing machine
Plug and socket testing equipment
test package
Laser Power Senser Measurement
Soil Sensor
Hot Product
IPX1 IPX2 Drip Waterproof Test...
UL1439 Sharp Edge Tester
BND-TPK05 IEC 60529 Test Probe...
IEC62368 test probe kit BND-TP...
IEC 61032 Standard Test Probe ...
IEC60320 EN60320 Appliances co...
UL 498 Standard Plugs and Rece...
IPX1 to IPX4 Drip rain test an...
Vertical horizontal vibration ...
IP5X IP6X Sand and dust proof ...
climate constant temperature a...
IPX1 to IPX9 waterproof testin...
 
 
Products
IEC 60335 clause 25.14 Power Cord bending Flexibility Test Apparatus
Name:IEC 60335 clause 25.14 Power Cord bending Flexibility Test Apparatus
Type:BND-DWJ
Manufacturer:Power Cord Flexibility tester used is designed to comply with the following standards; IEC 60227-2 clause 5.6.3.2 , IEC 60227-2 clause 3.2 and IEC 60335-1 clause 25.14.
Product Description:

IEC 60335 clause 25.14 figure 8 Power Cord Bending Flexibility test Apparatus



1 . Introduction

Small household appliances power cord flexibility tester is specially designed according to relevant standards. It applies to flexibility-resistant tests on cord of such household appliances and other similar appliances (or electric iron/coffee pot) with a power cord as need moving during operation. This tester is equipped with a high-precision digital instrument, high-performance digital frequency conversion, accurate rate adjustment, six digit memory settings, multi-function combination fixture, flexing angle adjustment and 3KW large power output, applying to the test requirements of most small household appliances.


The purpose of this test is to confirm the robustness of a supply cord at the point of entry to an electrical appliance. The point of entry for the cable is often a likely point of failure as the cable is excessively bent and flexed at this point against the hard corners of the appliance. (Please note: Cord bend testing is not a requirement for appliances with retractable power cable.)

The test and apparatus used is designed to comply with the following standards; IEC 60227-2 clause 5.6.3.2 , IEC 60227-2 clause 3.2 and IEC 60335-1 clause 25.14.


2. Test Theory

The part of the appliance that includes the inlet opening is fixed to the oscillating member so that, when the supply cord is at the middle of its travel, the axis of the cord where it enters the cord guard or inlet is vertical and passes through the axis of oscillation. The major axis of the section of flat cords shall be parallel to the axis of oscillation.

The cord is loaded so that the force applied is

– 10 N, for cords having a nominal cross-sectional area exceeding 0.75 m2;

– 5 N, for other cords.

The distance X, as shown in below figure, between the axis of oscillation and the point where the cord or cord guard enters the appliance, is adjusted so that when the oscillating member moves over its full range, the cord and load make the minimum lateral movement.

The oscillating member is moved through an angle of 90° (45° on either side of the vertical), the number of flexings for type Z attachments being 20 000 and for other attachments 10 000. The rate of flexing is 60 per minute.

The cord and its associated parts are turned through an angle of 90°after half the number of flexings, unless a flat cord is fitted. supplied at rated voltage and loaded with the rated current of the appliance. Current is not passed through the earthing conductor


3 . Technical Parameters

Flexing angle/rate

Angle range: 45°, 60°, 90° / 560 /minute

Counting device

0999999 six-digit memory pre-set values

Maximum output voltage

240V

Maximum output power

3KW

Maximum output current

12A

Maximum load capacity of sample

15kg

Standard load weight

One of 5N, one of 10N

Standard conformance

GB4706-1clause25.14,  IEC60335-1clause25.14 and Figure 8

IEC60335-1 Clause 25.14 Supply Cord Flexing Test Apparatus With One Working Station 0




 
Home  |  Products  |  News  |  About us  |  Feedback  |  Contact us  |  
Copyright © 2008-2015 Hong Kong Bonad Technology Limited | Shenzhen Bonad Instrument Co., LTD. All Rights Reserved.
 
    Add:C505, Hongdu Building,Bao\\\'an45 district,Shenzhen,518101,Guangdong Province,China    Tel:+86-13380391156    Fax:0755-23721200    Email:Alice@szbonad.com
 
日本久久久久久网址| 在线一区二区三区四区www| 在线人妻免费观看视频| 国产精品久久久久久久兔肉蒲| a片资源吧欧美日韩电影| 久久久91无码人妻一区二区毛片| Av换脸国产一区| 狠狠橾夜夜爽| xoxo 视频| 亚洲黄色小电影在线| 国外一区二区三区黄片| 五月婷婷中文综合网| 国产腿交视频美女| 国产图片成人精品丁香| 日本精品国产精品| 国产精品人妻无码一区二区三区四| 天天操天天射天天日天天人人| 日本媚药 在线| 伦理最新久久久一区二区三区| 欧洲色av无码| 男人天堂AV一区二区三区| 英国人妻一级片视频| 另外激情AV| 日日骚精品| 阿v视频在线观看| 韩国成人一区二区| 三及精品视频| 五日AV一区二区| 少妇在线net| 台湾一区无码| 小雪尝禁果又粗又大的视频| 3P欧美日韩17| 一区二区三区乱码欧洲在线| 午夜成人网久久福利网站| 午夜海外视频| 人人妻人人凑欧美一区| 女女同性AV一区二区三区| 有码在线视频h| 国产精品久久99精品视頻| 日韩美欧一区二区三区| 日韩综合在线第一页一页|