а√天堂中文在线资源bt在线,国产亚洲色婷婷久久精品,亚洲色图15p,久久国产精品久久

     
  中文版 English
 
Hot news:
  Products
IEC Test Finger Probe
IPX1-IPX9K Waterproof Test Equipment
Electrical Appliance Testing Equipment
Environmental Test Chamber
Battery test equipment
Textile Test Equipment
Mechanical testing machine
Plug and socket testing equipment
test package
Laser Power Senser Measurement
Soil Sensor
Hot Product
IPX1 IPX2 Drip Waterproof Test...
UL1439 Sharp Edge Tester
BND-TPK05 IEC 60529 Test Probe...
IEC62368 test probe kit BND-TP...
IEC 61032 Standard Test Probe ...
IEC60320 EN60320 Appliances co...
UL 498 Standard Plugs and Rece...
IPX1 to IPX4 Drip rain test an...
Vertical horizontal vibration ...
IP5X IP6X Sand and dust proof ...
climate constant temperature a...
IPX1 to IPX9 waterproof testin...
 
 
Products
IEC 60335-2-92 Figure 103  / figure 104 Foot Probe Test
Name:IEC 60335-2-92 Figure 103 / figure 104 Foot Probe Test
Type:BND-JM
Manufacturer:IEC 60335-2-92 Figure 103 , figure 104 Foot Test Probe
Product Description:

IEC 60335-2-92 Figure 103  figure 104 Foot Probe Test


Appliance:

The standard requires rotary power mowers to have protective shields. These shields prevent the operator's foot from contacting the blade, either under the mower's deck or in the discharge chute area, when the operator has his or her hands on the mower's controls. Generally, a shield must prevent a foot probe from entering the path of the mower blade or from forcing any part of the mower into the path of the blade. The only difference between the UL Foot Probe Model FP10 and International Foot Probe is the length of the simulated leg.

 

Standards :

IEC 60335-2-92 Figure 103, UL 82 and UL 1447

 

IEC 60335-2-92 Standards description:

20.103.1.3 Access to cutting means Inadvertent access to the cutting means by the feet during operation shall be prevented so far as is reasonably practicable.

 

On the operator side, the distance between the blade tip circle and the rear housing or a deflector shall be at least 120 mm (see Figure 101).

 

Scarifiers with discharge openings shall have deflectors (e.g. catchers, baffle plates) which catch thrown objects and prevent inadvertent access by the operator’s feet.

 

Movable deflectors shall return to the closed position automatically.

Instructions shall be affixed to the scarifier near the discharge opening and to the catcher adapter, if one is used, stating that the scarifier shall not be operated without either the entire catcher or the guard in place.

 

Compliance is checked by inspection.

For the guards at the sides of the machine, compliance is checked by the following test using the foot probe (Figure 103) as illustrated in Figure 104.

 

The scarifier is placed on a hard flat surface, the guards or deflectors or both being in the normal operating position on the cutting means housing and the support members (wheels) in contact with the supporting surface. The test is conducted under static conditions.

 

Single axle scarifiers are to be positioned as instructed by the manufacturer or so that the handle grip is 900 mm above the supporting surface.

 

The tests are made with the cutting means in the highest and lowest cutting position. The base of the test probe is held horizontally at any height and then inclined up to 15° forward or backward from the horizontal. The probe is applied at any point of the housing side.

 

The test probe shall not enter the path of the cutting means assembly. The test probe shall not lift the scarifier or any of its parts from the supporting surface.

Quality Insurance! IEC60335 Foot Probe for Safety TestQuality Insurance! IEC60335 Foot Probe for Safety TestQuality Insurance! IEC60335 Foot Probe for Safety TestQuality Insurance! IEC60335 Foot Probe for Safety Test



 
Home  |  Products  |  News  |  About us  |  Feedback  |  Contact us  |  
Copyright © 2008-2015 Hong Kong Bonad Technology Limited | Shenzhen Bonad Instrument Co., LTD. All Rights Reserved.
 
    Add:C505, Hongdu Building,Bao\'an45 district,Shenzhen,518101,Guangdong Province,China    Tel:+86-13380391156    Fax:0755-23721200    Email:Alice@szbonad.com